What the calculator reads
It needs only the first part of the marking: the width in millimetres, the sidewall as a share of that width, and the rim size in inches. For 205/55 R16 that is 205, 55 and 16. Load and speed codes after it, like 91V, play no part in the size, so it skips them. Every part of the marking, those codes included, is taken in turn on our page about reading a tyre.
Their car, repainted from one photograph in whichever of the nine styles suits the room. Free preview first, accepted on screen before anything is charged.
From £19.99 · Poster
On an old tyre with no sidewall figure, like 185R14, the tool takes 82%. That is the figure DVSA's testers are told to assume for a "standard" car tyre, and it's why 185R14 comes out at 659 mm.

How it is worked out
The sidewall is the width times the aspect ratio: 205 × 55% = 112.75 mm. The whole tyre is the rim plus two sidewalls. A 16 inch rim is 16 × 25.4 = 406.4 mm, so 205/55 R16 is 406.4 + 2 × 112.75 = 631.9 mm across. Those are the sums in UN Regulation No. 30, the international rule for car tyres.
| Size | Diameter | Turns a mile |
|---|---|---|
| 165/80 R13 | 594.2 mm | 862 |
| 185R14 | 659.0 mm | 777 |
| 205/55 R16 | 631.9 mm | 811 |
| 225/45 R17 | 634.3 mm | 808 |
The distance round the tyre is π times the diameter, and a mile is 1,609,344 mm, so dividing one by the other gives the turns a mile. These are the sizes the marking promises. A real tyre on a car is a little different, because it squashes under the weight and wears down.
Changing size and your speedometer
Put the size you have now in the first box and the one you are thinking of in the second. If your speedometer works from how fast the wheels turn, a bigger tyre makes it read low and a smaller one makes it read high. Going from 205/55 R16 to 225/45 R17, 70 mph on the dial is about 70.3 mph on the road. Ask a tyre fitter before you change: the rim width, the load rating and the clearance in the arches matter too.
Sources
UN Regulation No. 30 (definitions and the diameter formula), the MOT inspection manual (the 82% figure) and the Weights and Measures Act 1985 (the mile). All read on 30 October 2026. To check how old your tyres are, try the tyre date code tool.
Written by Craig Fearn, Petrol & Ink. Last updated .